You are here
Home > Firewall > Change IP Address of the Interface

Change IP Address of the Interface

1. Connect to the firewall via the Console port on the back of the unit. This is done either by a Serial cable or a RJ-45 to Serial cable.

2. Start HyperTrm.exe (Hyper Terminal)

3. Login with user name and password.

4. Execute the following Comments

    config system interface

                  edit <interface_name>

                  set interface <port_name>

                  set ip <interface_ipv4mask>

                  set allowaccess <access_types>

Leave a Reply

Top